100# Irradiated rubber jacket cable extruder

A. Equipment Usage

This equipment is suitable for high-speed extrusion of PVC, irradiated rubber materials, and other plastics. It is mainly used for extrusion of power lines, BV, BVV construction lines, computer lines, insulation line sheaths, steel wire rope coating, and automotive lines.

B. Main specifications

1. Manufacturing line type: used for extrusion of power lines, BV, BVV construction lines, computer lines, insulation line sheaths, steel wire rope coating, automotive line extrusion, etc.

2. Extruded material: Suitable for high-speed extrusion of plastics such as PVC and irradiated rubber materials, with a 100% plasticization degree.

3. Conductor diameter:Ф2.0~Ф15.0mm. (The size of the wire diameter needs to be equipped with corresponding molds)

4. Suitable wire diameter:Ф3.0mm~Ф20.0mm.

5. Maximum line speed: 0-200m/min (line speed depends on line diameter).

6. Center height: 1000mm.

7. Power supply: 380V+10% 50HZ three-phase five wire system

8. Operation direction: Main machine (operated from left to right)

C. Main components:

1. 1000-1250P magnetic powder tension pay-off rack: 1 set

2. Heating type powder passing machine: 1 set

3. Straightening table: 1 set

4. 100 # host+drying and suction machine: 1 set

5. Computerized control system: 1set

6. mobiles sink and fixed sink: 1 set

7. Laser diameter measuring instrument: 1 set

8. High speed printing machine: 1 set

9. Closed double wheel extractor: 1 set

10. Tension storage rack: 1 set

11. Electronic meter counter: 1 set

12. Spark machine: 1 set

13.1000-1250 single axis take-up machine: 1 set

14. Random spare parts and operation and maintenance instructions: 1 set

15. Complete machine painting: 1 set